Hermuler CNC
JCOE pipline Form Machine
Hermuler CNC
Edge milling machine
Edge milling machine is mainly used for milling chamfers, straight edges, and U-shaped grooves on steel plates. It can complete the milling work of all four edges, including top and bottom chamfers and fillets, with a single loading operation. The feeding table is equipped with automatic centering, automatic feed, and automatic magnetic adsorption of workpieces, suitable for continuous feeding along the long edge.
Hermuler CNC
Plate crimping press machine
Plate crimping press machine is used to pre bend the iron plate on both sides before pipe making, in order to ensure the roundness of the pipeline and reduce excessive straight edges. The machine adopts CNC control, with low flanging force and a wide range of flange curvature radius.
Hermuler CNC
pipe forming press machine
The advantages of JCOE production process are that it can produce more than 30mm thick steel pipe, which is suitable for the production of extra thick wall steel pipe; the disadvantages are low production efficiency (10 pieces / hour) and large investment. It is usually used for the production of straight seam submerged arc steel pipe with diameter range of 203 – 1422 mm, wall thickness of 8 – 40 mm and length of 10 – 12.5 m.
Hermuler CNC
Tack-welding machine
The pipe is pre-welded by gas protective welder. Then, the pipe is cut off. Pipe is submerged-arc welded off line to internal and external part. After the hydrotester, pipe end facing and beveling machine, welding seam and pipe body detector, the pipe is qualified. The sizing part adopts quick roller change technology to save the roller changing time.
Hermuler CNC
Internal Welding Machine
Pipe is submerged-arc welded off line to internal and external part. After the hydrotester, pipe end facing and beveling machine, welding seam and pipe body detector, the pipe is qualified. The sizing part adopts quick roller change technology to save the roller changing time.
Hermuler CNC
Pipe straightening press
Pipe straightening press machine.Main parts consists of over-length working table of fixed-type, moving frame of gantry type, upper die, movable V-shaped support ,hydraulic system and electrical system.This machine has the function of inching, single and keeping pressure, which can meet the requirement of work-piece straightening.
